High Quality Station Total - Land Surveying Instrument trimble M3 Total Station – Haodi
High Quality Station Total - Land Surveying Instrument trimble M3 Total Station – Haodi Detail:
Trimble Total Station |
|
M3 |
|
Telescope |
|
Tube length |
125 mm (4.91 in.) |
Magnification |
30 X |
Effective diameter of objective |
40 mm (1.57 in.) |
EDM 45 mm (1.77 in.) |
|
Image |
Erect |
Field of view |
1°20′ |
Resolving power |
3.0″ |
Focusing distance |
1.5 m to infinity (4.92 ft to infinity) |
Measurement range |
|
Distances shorter than 1.5 m (4.92 ft) cannot be measured with this EDM.Measurement range with no haze, visibility over 40 km (25 miles) |
|
Prism mode |
|
Reflector sheet (5 cm x 5 cm) |
270 m (886 ft) |
Standard prism (1P) |
3,000 m (9,840 ft) |
Reflectorless mode |
|
Reference target |
300 m (984 ft) |
• The target should not receive direct sunlight. |
|
•“Reference target” refers to a white, highly reflective material. |
|
(KGC90%) |
|
• The maximum measurement range of the DR 1” and DR 2” is 500m in the |
|
reflectorless mode. |
|
Distance precision |
|
Precise mode |
|
Prism |
± (2 + 2 ppm × D) mm |
Reflectorless |
± (3 + 2 ppm × D) mm |
Normal mode |
|
Prism |
± (10 + 5 ppm × D) mm |
Reflectorless |
± (10 + 5 ppm × D) mm |
Measurement intervals |
|
Measurement intervals may vary with the measuring distance or weather conditions. |
|
For the initial measurement, it may take few more seconds. |
|
Precise mode |
|
Prism |
1.6 sec. |
Reflectorless |
2.1 sec. |
Normal mode |
|
Prism |
1.2 sec. |
Reflectorless |
1.2 sec. |
Prism offset correction |
–999 mm to +999 mm (1 mm step) |
Angle measurement |
|
Reading system |
Absolute encoder |
Diametrical reading on HA/VA |
|
Minimum display increment |
|
360° |
1”/5”/10″ |
400G |
0.2 mgon/1 mgon/2 mgon |
MIL6400 |
0.005 MIL/0.02 MIL/0.05 MIL |
Tilt sensor |
|
Method |
Liquid-electric detection (Dual axis) |
Compensation range |
±3′ |
Tangent screw |
Friction clutch, endless fine motion |
Tribrach |
Detachable |
Level |
|
Electronic level |
Displayed on the LCD |
Circular level vial |
Sensitivity 10′/2 mm |
Laser plummet |
|
Wave length |
635 nm |
Laser class |
Class 2 |
Focusing range |
∞ |
Laser diameter |
Approx. 2 mm |
Display and keypad |
|
Face 1 display |
QVGA,16 bit color, TFT LCD, backlit (320 x 240 pixel) |
Face 2 display |
Backlit, graphic LCD (128 x 64 pixel) |
Face 1 keys |
22 keys |
Face 2 keys |
4 keys |
Connections in the instrument |
|
Communications |
|
RS-232C |
Maximum baud rate 38400 bps asynchronous |
USB Host and Client |
|
Class 2 Bluetooth® 2.0 EDR+ |
|
External power supply input voltage |
4.5 V to 5.2 V DC |
Power |
|
Output voltage |
3.8 V DC rechargeable |
Continuous operation time |
|
Continuous distance/angle measurement |
approx 12 hours |
Distance/angle measurement every 30 seconds |
approx 26 hours |
Continuous angle measurement |
approx 28 hours |
Tested at 25 °C (nominal temperature). Operation times may vary depending on the condition and deterioration of the battery. |
|
Environmental performance |
|
Operating temperature range |
–20 °C through +50 °C |
(–4 °F through +122 °F) |
|
Storage temperature range |
–25 °C through +60 °C |
(–13 °F through +140 °F) |
|
Dimensions |
|
Main unit |
149 mm W x 158.5 mm D x 308 mm H |
Carrying case |
470 mm W x 231 mm D x 350 mm H |
Weight |
|
Main unit without battery |
4.1 kg (9.0 lbs) |
Battery |
0.1 kg (0.2 lbs) |
Carrying case |
3.3 kg (7.3 lbs) |
Charger and AC adapter |
0.4 kg (0.9 lbs) |
Environmental protection |
|
Watertight/dust-proof protection |
IP66 |
Product detail pictures:
Related Product Guide:
We are proud of the superior customer gratification and wide acceptance due to our persistent pursuit of top of the range both of those on merchandise and service for High Quality Station Total - Land Surveying Instrument trimble M3 Total Station – Haodi , The product will supply to all over the world, such as: Czech republic, Madras, Bandung, Although continuous opportunity, we have now now developed serious a friendly relationship with many oversea merchants, such as ones through Virginia. We securely assume that the merchandise regarding t shirt printer machine is often good through a great number of having its good quality and also cost.
By Roxanne from Singapore - 2017.01.28 19:59
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
By Sara from Munich - 2017.06.25 12:48